Walgreens Heating Pad Moist/Dry 12" X 24" Blue

12 in x 24 in (30.5 cm x 61 cm). 4 heating settings with moist or dry application. Non-vinyl, soft & flexible pad. Machine-washable cover. Heat therapy. 2 hour auto-off. Walgreens pharmacist recommended (Our pharmacists recommend the Walgreens brand). UL listed. FCC listed. walgreens.com. how2recycle.info. 1-888-684-4514. Made in China POWERING ON FOR DRY HEAT THERAPY 1) Plug the power cord into the electrical outlet. 2) Set controller to the desire setting. ON/LOW - Press button once to turn the unit on. LED 1 will light up to indicate WARM heat setting. - Press the button twice and LED 1 and LED 2 will light up to indicate the LOW heat setting. - Press the button three times and LED 1, LED 2, and LED 3 will light up to indicate the MEDIUM heat setting. - Press the button four times and LED 1, LED 2, LED 3, and LED 4 will light up to indicate the HIGH heat setting. 3) Place heating pad on the desired area of the body. POWERING OFF To restart the pad at any time, press the (On/Off) button until all LEDs are no longer lit to turn the pad off. Thus, the auto shut-off timer is reset. Be sure to disconnect the unit from the power source after each use. Never leave a connected unit unattended. POWERING ON FOR MOIST HEAT THERAPY 1) Unplug the power cord from the electrical outlet. 2) Use a spray bottle with water to lightly mist the surface of the heating pad cover only. Do not soak. a) DO NOT immerse the heating pad in water or place under running water. b) DO NOT spray water on the connector. 3) Follow Dry Heat Therapy steps 1 through 3 above. 4) Press the OFF button and unplug the cord when finished. AUTOMATIC SHUT-OFF Your heating pad is equipped with a special safety feature designed to shut the heating pad off after 120 minutes of use. When the automatic shut-off feature turns the pad off, the LEDs on the controller turn off. To restart the pad, press the (On/Off) button for the heat selection process to start again. WASHING INSTRUCTIONS DO NOT IRON YOUR HEATING PAD! DO NOT USE BLEACH! DO NOT DRY CLEAN! 1) Set controller to OFF and disconnect unit from electrical outlet. 2) Remove cover and machine wash cover only in warm water on gentle cycle; tumble dry on medium heat. Remove promptly from dryer. Alternatively, hand wash in warm water and line dry. ONLY THE COVER IS MACHINE WASHABLE 3) Wipe non-vinyl pad with a damp cloth. Do not dampen the cord. Hang to dry. a) DO NOT immerse heating pad in water or place under running water. b) DO NOT spray water on controller. c) DO NOT plug pad in until it is completely dry. SAFETY MODE Safety Mode (top LED blinking) note: If the light on your unit controller is blinking, your product has gone into Safety Mode. MTI Accu-Heat medical devices are designed with your safety in mind. If your unit has gone into safety mode, please contact MTI by emailing customer service CSUPPORT@MULTITECH-USA.COM OR CALLING AT 1-888-684-4514. ©2023 Walgreen Co.

Availability verified during our latest store check. If the item isn't on the shelf when our courier arrives, the order is cancelled and you are refunded in full.